What Is #57 Stone? Uses, Size and Ordering Tips

What is #57 stone? It is a graded coarse aggregate commonly sold for construction and landscaping applications. The number identifies an aggregate size classification, not a type of rock or a precise weight per cubic yard. Depending on the quarry, the material may be crushed limestone, granite or another suitable aggregate.

#57 stone is often selected when a project calls for relatively clean coarse particles instead of a blend packed with fine dust. But you should still confirm the actual sieve grading, material source and intended use before buying it for a driveway, drain or structural application.

Estimating drain stone? See how much gravel a French drain needs for trench volume and pipe displacement. The drainage design must specify the required aggregate gradation; do not assume every product labeled #57 is appropriate.

What Is #57 Stone and What Does the Number Mean?

The ‘#57’ designation refers to a specified distribution of particle sizes. Aggregate producers use sieves, which are screens with controlled openings, to determine how much of a sample passes each size. It is not a promise that every individual stone is exactly 0.57 inch or any other single measurement.

The ASTM C33/C33M aggregate standard covers grading and quality requirements for aggregates used in concrete. Suppliers may identify a product with a size number under that or related specifications. Always confirm the specific standard and edition cited in the project documents.

Some yards label the product ‘#57 gravel,’ ’57 stone’ or ‘clean three-quarter stone.’ Those names may describe similar products, but regional practices differ. A knowledgeable supplier should be able to say whether the offered material matches the exact gradation required by your project.

What size is #57 stone? A sieve-size reference

In the AASHTO M 43-05 grading summarized by the Federal Highway Administration, No. 57 is a graded mixture, roughly 1 inch down to the No. 4 sieve, rather than a pile of identical 0.57-inch stones. A small proportion of finer material is allowed. The percentages below describe how much material passes each sieve, not the size of every individual rock.

Sieve opening No. 57 material passing
1½ inches 100%
1 inch 95%–100%
½ inch 25%–60%
No. 4 (4.75 mm) 0%–10%
No. 8 (2.36 mm) 0%–5%

Reference: FHWA report FHWA-HRT-23-046, Table 3, citing AASHTO M 43-05. Your project’s specified standard, edition, and supplier test results take precedence.

Buying tip: Ask the quarry whether its product meets the required No. 57 gradation, whether the load is washed, and what its loose bulk density is. Then use the Crushed Stone Calculator to estimate volume and tons or the Stone Cost Calculator to compare the delivered quote.

Understand grading before relying on a label

Gradation describes how many particles belong to different size ranges. A screened stone product may contain predominantly medium coarse pieces with relatively few fines. A dense-graded base uses a wider range of particles, including smaller ones that fill gaps between larger stones.

These details affect permeability, compaction behavior and load support. The Federal Highway Administration’s granular-base guidance explains how grading, durability and particle shape influence aggregate performance. That is why contractors use specifications instead of choosing only by the pile’s appearance.

A washed product has generally been processed to remove some fine material. However, ‘washed’ does not mean that every load will have zero dust or the same moisture content. Verify the actual supplier description, especially when the rock will go around a drainage pipe or into a specified concrete mixture.

Where #57 stone is commonly used

Coarse graded stone can be used in various drainage and construction settings when its actual properties match the design. Examples include certain pipe bedding layers, drainage beds, concrete mixes and landscaping areas. These are potential applications, not a claim that every #57 material is automatically approved for each one.

For a drain, the system requires more than rock with gaps. Soil filtration, pipe placement, adequate outlet elevation and management of surface water all matter. Stone cannot carry water away if the design leaves the flow with nowhere to go.

In concrete, aggregate has to satisfy the mix design and applicable quality requirements. Do not purchase decorative #57 stone and assume it is acceptable for a specified ready-mix application. The supplier or concrete producer should identify a tested product.

Is #57 stone good for a driveway?

It depends on the role of the stone in the driveway system. A clean coarse surface may move or feel loose under certain tires and traffic. A compacted dense-graded base behaves differently because smaller particles help fill spaces and create a more stable layer.

That does not mean clean stone has no place in driveway design. Some assemblies use coarse stone for drainage or a specific structural layer, and others use it in decorative surface applications. The right answer depends on soil conditions, traffic, slope and an approved layer design.

If a contractor requests crusher run or a specified dense-graded base, do not substitute #57 stone without permission. The names identify different gradations and often different intended behavior. Ask the supplier for both product sheets before making a change.

How is it different from crusher run?

Crusher run generally describes a blend of crushed rock sizes that contains fines. Those fines can help a suitable base material compact into a firm layer. #57 material is often sold as a cleaner coarse fraction with fewer smaller particles, although you must confirm the exact grading.

A lower amount of fines may leave more interconnected void space, which can be useful in an appropriately designed drainage layer. More void space also means the material does not necessarily provide the same finished bearing surface or compaction response as a dense-graded aggregate.

For detailed comparisons, read Crushed Stone vs Gravel. The term ‘gravel’ sometimes includes crushed and uncrushed products, so the important distinction is the grading and the product’s approved use rather than the label alone.

Calculate how much #57 stone you need

Measure the area and the planned stone depth first. For a rectangle, multiply length by width to find square feet. Divide the depth in inches by 12, multiply by square feet and divide by 27 to calculate cubic yards.

Suppose a landscaping drainage layer covers 18 by 10 feet with a planned 4-inch thickness. The area is 180 square feet. The depth is one-third of a foot, producing approximately 60 cubic feet, or 2.22 cubic yards before allowance.

That is only the geometric volume. The material may be delivered loose, settle during placement or have a specific installed yield. Use your supplier’s measured product data if it must be converted to an order quantity or if the installation requires compaction.

Try the Crushed Stone Calculator to estimate cubic yards, weight and optional ordering allowances. Keep its density input editable and replace any generic example with the quarry’s loose bulk density for the product you intend to buy.

Convert #57 stone from yards to tons carefully

A cubic yard measures volume, while a US short ton measures 2,000 pounds of mass. You cannot infer tonnage precisely from stone size alone. Rock source, moisture, void space and grading determine how many pounds fit in a delivered loose cubic yard.

If the supplier provides kilograms per cubic meter, multiply the loose volume in cubic meters by the density to get kilograms. Divide by 907.18474 to convert kilograms to US short tons. The NIST conversion factors support these unit conversions.

For an illustration, a bulk density of 1,500 kg/m³ gives about 1.26 US short tons per cubic yard. That figure is useful for learning the formula, not for ordering an unverified product. Your local quarry may report a materially different value.

Compare product quality and delivered cost

Before accepting a quote, ask what rock type is included, whether the product is washed, which gradation specification it meets and how the supplier measures the sale quantity. A quote per ton and a quote per yard must be converted to a common basis to compare properly.

Check the minimum load, delivery fee, tax and whether trucks can safely access your project. If you need a clean drainage stone, find out how it will be stored and unloaded so it does not become mixed with soil or screenings before installation.

For projects tied to a drawing or permit, keep the aggregate name exactly aligned with the specified standard. A similar-looking load is not an adequate substitute when permeability, compaction or quality limits are important.

Questions to ask the aggregate supplier

  • Is this sold as ASTM or AASHTO size #57, and can you provide the gradation?
  • What is the rock type and is the load washed or screened?
  • What loose bulk density applies for weight-to-volume conversion?
  • What installation uses does the supplier recommend?
  • Is the order by cubic yard, short ton or metric tonne?
  • What are the minimum delivery size, unloading rules and extra fees?

Write down the answers before calculating the final purchase. That short record is especially useful if the site needs more material or if an installer asks how the original estimate was prepared.

FAQs: What Is #57 Stone?

Q. Does #57 mean every stone is 0.57 inch wide?

A. No. It is an aggregate grading designation, not one exact particle dimension.

Q. Is #57 stone always washed?

A. No universal naming practice guarantees that. Ask the local supplier whether the specific product is washed and what fines are allowed.

Q. Can #57 stone replace a compactable driveway base?

A. Not automatically. The grading and intended performance may differ. Follow the project specification or a qualified designer’s recommendation.

Q. How many tons are in one cubic yard of #57?

A. Weight depends on loose bulk density. Request supplier data instead of relying on one universal conversion.

Conclusion

Now you know what #57 stone is and why its grading matters. Confirm the exact product specification and its loose bulk density, then use the Crushed Stone Calculator to prepare a project-specific order estimate.

Disclaimer

This article provides general information about aggregate products and measurement. Drainage, concrete and structural applications require appropriate specifications, qualified assessment and local code compliance. Verify material requirements before ordering.